Owner`s manual

E35 / E95 ELLIPTICAL7
#186. Phillips Head Screwdriver
ASSEMBLY TOOLS
#185. Short Phillips Head Screwdriver
#187. 12/14mm Wrench (160mm)
#184. 13/14mm Wrench (160mm)
1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along
the dotted Line. Lift Box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing
parts. If damaged parts are found, or parts are missing, contact your dealer
immediately.
3. Locate the hardware package. Remove the tools rst. Remove the hardware
for each step as needed to avoid confusion. The numbers in the instructions
that are in parenthesis (#) are the item number from the assembly drawing
for reference.
PRE-ASSEMBLY
E35 / 95 ASSEMBLY INSTRUCTIONS