Hardware Manual

www.acti.com
Hardware Manual
19
Step 5: Connect to Network
On the network side, connect the other end of the network cable to a network switch. See Basic
Connections on page 20 for more information.
Step 6: Access the Camera Live View
See Accessing the Camera on page 28 for more information on how to access the Live View
of the camera.
Step 7: Adjust the Viewing Angle and Focus
Based on the Live View, adjust the viewing angle, focus, and orientation of the camera.
Adjustments vary depending on model, see How to Adjust the Viewing Angle and Focus on
page 21 for more information.
Step 8: Close the Dome Cover
1. Align cable tab side of the dome cover to the direction of the network cable.
2. Tighten the three (3) screws using the supplied hex screwdriver to attach the dome cover.
Final installation should look similar to the illustration below.