User Manual
www.acti.com
ENR G3 Series System Administrator’s Manual
12
Installation
The installation procedures may vary depending on your site conditions. The procedures
provided in this manual are based on an example consisting of (1) local network, (2) an ENR
unit, (3) ACTi network cameras, (4) a POE network switch and (5) necessary peripherals.
Prepare the Devices
Before starting connecting all the devices together, please read the instructions below to
make sure your devices are ready for ENR system.
Cameras
The camera’s connection type is Dynamic mode (DHCP Client). Configure this connection
settings via Web Configurator.
Monitor
The monitor should supports HDMI port and 1080p full HD resolution display.
USB Devices
Please use a USB mouse, keyboard or joystick with a cable.
USB Storage Device
The USB storage device is required for system backup and system log / snapshot / video
export.
ENR supports all FAT/FAT32/EXT2/EXT3/EXT4/NTFS file systems.
Note
ACTi camera web configurator interface