User Manual
www.acti.com
ENR G3 Series System Administrator’s Manual
14
Network Connection Architecture
When connecting ENR with your network, please make sure you plug the network cable into
the right port.
LAN Port
LAN port is the default camera port for a typical local network. Via this port, the DHCP server
built in ENR automatically assigns IP addresses to network cameras once they are
connected. With this feature, you do not have to bother arranging the camera IP addresses
on your own. By default, this DHCP server is enabled, so please avoid connecting ENR to a
network where exits another DHCP server via this port.
Connection Setting Example 1
Below diagram displays an example connection setting using only LAN to connect networks
cameras.
In this setting, ENR altogether with cameras are within the same network segment; in the
meantime, there is no need of referencing another DHCP server in this system.
LAN
Port
Default:
192.168.0.10
WAN
Port
Default:
Dynamic /192.168.1.10