User Manual

www.acti.com
ENR G3 Series System Administrator’s Manual
35
Change POS Settings
After the devices are added, you may change their properties on the Device Settings page.
To access the Device Settings page, right-click on the channel and click Setup.
Click the page tab to access the corresponding functions like POS, Event, and Schedule
setup.
On the POS page, you can modify the configurations previously set when adding a POS
system. The GPS Position can also be enabled and configure here. After modifying any
settings, click “Apply” to save.
Configure POS Event and Schedule
Event rules become active or inactive based upon a weekly or specific schedule. By default,
the POS system is enabled to record full time with event handling. The event-handling
schedule of each POS system is enabled for 24 hours once it is added to the ENR system.
To configure the Event Handling Schedule, on the Live screen, right-click on the POS
device to display the pop-up menu, then click Setup. Select the “Schedule” tab. Select Drag
on the 24-hour time table.