User Manual

www.acti.com
ENR G3 Series System Administrators Manual
42
Change Network DIO Settings
After a device is added, you may change its properties on the Device Settings page. To
access the Device Settings page, right-click on the device from the left panel and click
Setup.
Click the page tab to access the corresponding functions like Network IO, Event, and
Schedule setup.
Modify the configurations on the Network IO page. The parameters may vary depending on
the input/output specifications of the network DIO module.
Under Basic Configs, you can modify the Port, Account, and Password. , and set the
Connection Timeout (sec) and Polling Period.
Set Connection Timeout (sec), this is the time that ENR will wait for the network IO device
for a response. Polling Period (sec) is the time period when ENR will fetch data from the
network IO device.
Under Text Style, you can define how the notifications appear on the ENR. Text styles like
font, font size, font color, and text alignment can be configured here.
Under GPS Positioning, check the “Enable box to enable GPS positioning of the device,
then define the Latitude and Longitude.
Network Items displays the available ports on the network IO device. You can modify the
name of each port as well.
After modifying any settings, clickApply to save.