User Manual

www.acti.com
ENR G3 Series System Administrators Manual
45
Access Control
The ENR user interface also allows you to add access control devices.
Add Access Control Device
1. On the Live page, click Add > Add Access Control. The Access Control pop-up
appears.
2. Input the necessary fields as below:
a. Name: Type the desired POS name to identify this device.
b. Brand: Select the access control device brand name. Depending on the device
brand, the succeeding fields may vary.
c. Server Address: Type the IP address of the access control device.
d. Port: Type the COM Port to which the device is connected.
e. Polling Interval (Secs): The amount of time to display the transaction entries on
the camera view.
f. Device ID: Type the ID to assign to the device.
g. Account and Password: If required by the device, type the Account or User
Name and Password to access the access control device.
3. Click Add to save the settings.
1
2
3