User Manual

www.acti.com
ENR G3 Series System Administrators Manual
46
Change Access Control Settings
After an access control device is added, you may change its properties on the Device
Settings page. To access the Device Settings page, right-click on the channel and click
Setup.
Click the page tab to access the corresponding functions like Access Control, Event, and
Schedule, and Door User setup. Available functions vary depending on the device model.
The Access Control page is further divided into subpages like: Basic Configs, Devices,
Management, User and Time Period. Available functions vary depending on the device
model.
Basic
On the Basic Configs page, you can find the pertinent information of the device such as
model, firmware version, etc.. Modifying any of the settings after adding the device can be
done on this page. Settings include: server Address, Port, Account, Password and
Display Mode: Text only or Text + Video. When Text + Video is selected on Display Mode,
a separate camera must be defined or linked to the access control device. See Devices on
page 47 for information.
You can also define how the notifications appear on the ENR. Text styles like font, font size,
font color, and text alignment can be configured on this page. Set Dwell Time to define how
long the text should appear on the live view.
After modifying any settings, clickApply to save.