User Manual

www.acti.com
ENR G3 Series System Administrators Manual
54
Schedule Recordings
Unlike the traditional analog surveillance system, the IP surveillance system provides a
target-oriented recording schedule for devices; the view of each device can be recorded
based on your required time segments and event types. For example, you may have a
camera installed on the office ceiling do continuous recording during work hours, and record
only upon the triggers (incidents that detected by system) at night. In this way, the system
does not waste disk space storing meaningless parts, and you save lots of effort browsing
playback for specific events.
For the Recording Schedule of cameras, ENR supports Full-time recording, No Schedule,
Event recording and Event Speed-up Recording modes, which are set up on a
week-based timetable; the event-handling schedule is configured here. For other devices like
POS, Parking Systems, etc., only full-time recording is available.
On ENR, you can configure the device recording schedule on 7 days / 24 hours basis. The
schedule is split into segments of one-hour-length. By default, once a device is added to the
system, its schedule is automatically set to full-time schedule recording and event handling.
You should configure it according to your system plan.
On the Live screen, right-click on the device to display the pop-up menu, then click Setup.
Select the Schedule tab.
NOTE: The above interface shows the Schedule page of cameras. The interface of other
devices may vary depending on the available functions on the device.