User Manual

www.acti.com
ENR G3 Series System Administrators Manual
59
PTZ
For the use with PTZ cameras to make movements toward certain triggers, please configure
the preset points thru the remote client or the camera web configurator before you set the
event rule.
On the PTZ tab, check Enable to enable this function. Select which PTZ camera in the ENR
server to make the movement, then the preset points and duration time between them. Click
Save to save the configuration.
Digital Output (DO)
On the DO tab, check Enable to enable this function. Select the device: Camera, Network
IO or ENR System (only the devices that support DO functions will be shown) and the device
whose DO(s) are connected will be triggered. Select Low to turn OFF the DO or High to turn
ON the DO. You may select one DO to be activated after the other and the duration time
between them. To add the trigger to the list, click the + button. Repeat the above procedures
to add more DO triggers.