User Manual
www.acti.com
ENR G3 Series System Administrator’s Manual
60
Email
Enable ENR to send e-mail notifications via SMTP service. Check the “Enable” to enable this
function, and fill in the mail recipient’s e-mail address in “To” field, notification title in “Subject”
field and mail body in “Body” field, check “Attach a Snapshot” then choose a camera whose
snapshot will be attached from the Camera dropdown list. Clik “Save” to save the
configuration.
Please note that if you want to attach a snapshot to the notification e-mail, make sure your
local display stays on Live screen during the event handling period, in this way, ENR can
take the snapshots for motion events.
To enable this service, you have to configure the e-mail setting (see E-mail Settings on page
68) before this trigger is enabled.
URL
When an event is triggered, the event handler can send a URL command to another device.
An example would be when the access control device at the entrance detects an entry, this
device provides a DI signal to the PTZ camera, and triggers an event.
On the URL tab, check the “Enable” to enable this function. Enter the target device IP
address, URL command to issue, target device port number, account and password. Click
“Save” to save the configuration.