User Manual

www.acti.com
ENR G3 Series System Administrators Manual
74
Ethernet Settings
Go to System Setup page Network tab Ethernet and select the interface card that you
wish to set up. After setting up, please click Save to save the settings.
Field Name
Description
Connection Type
Choose one connection type for the Ethernet port. DHCP and PPPoE
service will assign an IP Address to ENR, and there is no need for
you to define other network information.
Manual: Obtain a static IP address and other network information
including Subnet Mask, Gateway and DNS server from your network
administrator. And input the properties on this page.
DHCP: Use this connection type if you have a DHCP server on your
network router.
WAN default is Manual; LAN default is DHCP.
IP Address
Fixed IP Address. WAN default is 192.168.0.10; LAN default is Auto.
Subnet Mask
Used to define if the destination is in the same subnet. WAN default
is 255.255.255.0; LAN default is Auto.
Gateway
A valid gateway setting is essential for data transmission between
different subnets, such as accessing the DNS service or SMTP
server on the Internet. WAN default is 192.168.0.254; LAN default
is Auto.
Connection Status
ShowsActivated when connected to a network.
ShowsA network cable is disconnectedwhen not connected to a network.