Manualshelf

User Manual

ManualsBrandsACTi ManualsNVR9-Channel 2-Bay Desktop Standalone NVR with 8-Port PoE Connectors
71727374757677787980
www.acti.com
ENR G3 Series System Administrator’s Manual
76
Enable DHCP Server
You may enable the built-in DHCP server for either WAN or LAN port.
Go to System Setup page Network tab click “DHCP Server”:
1. Check “Enable” and select a LAN, this LAN has to be in Manual mode.
2. Set the Beginning IP Address and Ending Address, and click “Save”. ENR will assign
IP addresses within this range to the cameras connected to the selected LAN port.
Please (1) make sure the cameras are in DHCP client mode, (2) connect and power the
cameras up after you enable this service.