User Manual
www.acti.com
ENR G3 Series System Administrator’s Manual
83
S.M.A.R.T Status
Description
Solution
FAILED
A number of errors have been
found on this disk.
UNKNOWN
Unable to get the disk
information.
Manage Abnormal Disks
A disk that is not recognized as “PASSED” by S.M.A.R.T. check may have unexpected
failures anytime. However, it will still continue recording until it finally fails.
After you disabled the recording on this disk and review important recordings,
1. Turn off the device.
2. Replace the abnormal disk with a new one, and turn on the device.
3. Go to System Setup click Storage tab click “Management”, and click “Format”
to format the new disk.
iSCSI
Use this page to manage iSCSI device.
1. Go to System Setup click Storage tab click “iSCSI”.
2. Inpu the IP Address of the target iSCSI server.
3. Click “Discovery”.
4. Select the discovered server and click “Connect”.