User Manual

www.acti.com

ENR G3 Series System Administrator’s Manual

Maintenance

Firmware Upgrade

You may check ACTi corporate website for the latest ENR firmware package and download it.

Unzip the package and save the *.upg file to the root directory of a USB disk and insert it into

ENR USB port.

1. Go to System Setup  click Maintenance tab  select “Firmware Upgrade”.

2. Select the source disk where you saved the *.upg file.

3. When ENR identifies the file, the “Upgrade” button will be enabled.

4. Click “Upgrade”. While upgrading, the system will stop every other activity including

recording and event handling. The system will auto-restart after the upgrading

completes.

After upgrading has started, DO NOT cut off the system power or eject the USB disk

until the ENR restarts.

Please note that

The USB disk carrying the firmware image should at least have 200 MB free space.