Manual

www.acti.com
Hardware Manual
40
How to Replace the Dome Cover
The original dome cover that comes with the camera is Vandal Resistant (IK09). The dome cover
can be replaced with a transparent or smoke Vandal Proof (IK10) dome cover available for
purchase.
To replace the dome cover, do the following:
1. Loosen the four (4) screws using the hex screwdriver included in the camera package.
2. Carefully lift the cover. Using a screwdriver, remove the screw to detach the cover from the
camera.
3. Prepare the replacement dome cover. Below is an example of the smoke vandal proof cover.