User`s manual

www.acti.com
Firmware User’s Manual V5.05.07
14
Zoom Lens Control Panel
If you are using Zoom / Auto Focus camera, this screen is available by clicking on PTZ button in
the live view screen.
You can change the current zoom ratio by clicking on either
the continued Zooming buttons, or the Stepped zooming
buttons. Step size will determine how much each click on
stepped zooming changes the zoom ratio.
Speed determines how fast will zoom control operate
under continued zoom.
There are two Focus Control Modes.
1. Auto Refocus after Zoom
means that the camera will
readjust focus after every
zooming operation.
2. Manual focus control will allow you to manually select
the focus distance, so that if the automatically
determined focus position is not what you have in mind,
you can easily adjust it to your liking.
You can press the “Refocus” button to readjust focus.
You can configure up to 32 Zoom presets below. Just click Set, enter the name and move the
zoom/focus position to what you desire, then click set again. You can instantly ask the camera to
go to that zoom and focus position by clicking on the Goto button.
Click Delete to remove this zoom preset point from camera memory.