User Manual

www.acti.com
KCM-7311 Hardware User’s Manual
14
2. Installation Procedure
Connecting the IP Outdoor Rugged Dome
1) Remove the cover
Remove the dome cover with special hex wrench in the accessory kit.
zz
2) Insert the cable
There are two conduit holes on this rugged dome. One is at the bottom, while the other is at the
side and covered with a plug. Remove the plug if your cable will go through the one at the side
of the rugged dome
3) Connect cables to connectors
Please follow the instructions in the Physical Description section for how to connect to each
connector.