Manual

www.acti.com
Product Manual
11
Item
Description
3
LCD Screen
Displays the video and on-screen display (OSD) menu
options.
4
Navigation Keys
Press the corresponding arrow to move through the menu
items on screen or perform PTZ functions when viewing a
PTZ camera.
5
ESC Key
Press to exit the current page without saving or return to
the previous page.
6
Power / Snapshot / Enter
Key
Power Function
Press and hold this key for at least 3 seconds to turn on
the device. Make sure the main power switch is switched
on.
Snapshot Function
When viewing a video, press this key to capture the snap
shot of the current video.
Enter Key Function
While navigating a menu, press this key to enter a
submenu or select an option.
7
Serial Port Connector
Connects to a serial device, such as a PTZ scanner, etc.,
using RS-485 protocol.
8
DC 12V Power Connector
Connects to the bundled power adapter to charge the
device battery.
9
Ethernet Cable Tester Port
Use for Ethernet cable testing. Connect one end of the
network cable to this port and the other end to the bundled
Ethernet Terminal Block to detect wiring types
(Straight/Cross) or errors (Open, Short, Miswired) from the
displayed wire map on the LCD screen.
10
Battery Charging Indicator
LED
Lights up while the battery is charging.
11
Power Switch
Slide the switch to turn the main power on or off.
12
Audio Output Jack
Connects to an audio output device, such as a headset,
etc.
13
Audio Input Jack
Connects to an audio input device, such as a microphone.
14
Stylus
Use to tap on the LCD screen.
15
BNC Connector
Connects to an analog input device, such as a camera or
encoder using BNC connection.
16
Battery Compartment
Houses the device battery.