Manual

www.acti.com
Product Manual
13
Preparing the Device
Charging the Battery
Charge the bundled Li-ion battery approximately for two (2) hours before use. The battery
supports up to three (3) hours of operating time and varies depending on the connected camera.
To charge the battery, do the following:
1. Slightly press and slide to open the battery
compartment cover.
2. Insert the battery towards the direction indicated
by the battery arrow.
3. Close the battery compartment cover.
4. Connect the adapter to the DC 12V Power Connector of the device.
5. Connect the power cord to the power adapter.
6. Plug the power cord to a power outlet.
The Charging Indicater LED lights up as the battery is being charged.
NOTE:
 Use only the power adapter that is bundled with the device or approved by the
manufacturer.
 When unplugging the power cord, pull on the plug head and not on the cable.