Manual

www.acti.com
Product Manual
26
IP Camera Live View
The Camera Installation Kit can automatically detect and recognize the IP Camera that is
connected to it. Please connect the IP Camera to the Device’s LAN port; plug in the IP Camera if
not using PoE. For further information about PoE, please refer to Power over Ethernet (PoE) on
page 36.
Automatically Change Device IP Address
After the IP Camera is powered on, the Camera Installation Kit’s IP address will be automatically
detected and displayed on the screen.
Please refer to the following sections for connecting the IP Camera and viewing live video in
alternative ways.
Connect IP Camera (Direct Connection)
Setup for Direct Connecting
Tap the <IP Camera> icon on the Main Menu to enter the submenu.