Manual

www.acti.com
Product Manual
39
Enable PoE after Device Bootup
For users who wish to enable PoE in the meantime while the Device is booting up, please select
<ON> from the drop-down list of <Enable PoE when booting>, and the Device will provide
electricity to the IP Camera right after system startup.
PoE Auto-shutdown
Select the PoE auto-shutdown interval between 20 seconds, 40 seconds and 60 seconds. The
setup can aid conserving battery power when there is no IP Camera or other device using the
Device as the PSE. The reminder of PoE shutdown will pop out around 5 seconds in advance of
shutting down.
Tap <Enter/Save> to save all the settings and you will then automatically directed to the
Main Menu. Or tap <Return> to exit the setting page without saving settings.