Manual

www.acti.com

Product Manual

Set the Dome Type

Select <Enable> or <Disable> from the drop-down list of the <Dome Type>. <Enable> means

activating PTZ control on the Camera Installation Kit, while <Disable> indicates disabling PTZ

control on the Device.

Set the Protocol

Select the protocol for the Speed Dome Camera from the drop-down list.

Set the Baud Rate

Select the baud rate for the Speed Dome Camera from the drop-down list.

Set the ID Address

Enter the three-digit ID address.

Tap <Enter/Save> to save all the settings and you will then automatically directed to the

previous page. Or tap <Return> to exit the setting page without saving settings.