Manual

www.acti.com
Product Manual
48
Add a Camera to List
To add a camera to the Camera Profile list, please enter its model name in the <Camera Profile>
column and tap the icon on the right side of this column; while canceling a camera, select
the camera to be deleted, and then tap the icon . Up to 128 IP Cameras can be assigned for
testing.
Tap <Enter/Save> to save all the settings and you will then automatically directed to the
previous screen. Or tap <Return> to exit the setting page without saving settings.
Setup- IP Camera (Load the Network Settings)
For checking or altering the IP Camera’s network settings such as Subnet mask, Default gateway,
Primary DNS, Web server port, etc., users can go to the <Setup- IP Camera> page. Tap the
<Setup- IP Camera> icon and enter its setup page as shown below.
Load Settings from the IP Camera
Please tap the <Load from Camera> button on the top of the menu and the IP Camera’s network
settings will be shown in the blank field.
NOTE: Make sure the target camera’s settings are correctly configured, or the loading here
will fail. For altering the camera settings, please go back up one level by tapping on <Return>
button. Then enter <Setup- IP Connection> to change camera settings.
Reload the Settings to the IP Camera
After making network setting changes, users may tap the <Set to Camera> button on the top of
the setup page to reload the network settings to the camera.