Manual

www.acti.com
Hardware Manual
17
Final installation example below:
Step 3: Route and Connect the Camera Cable
The camera cable is 12 meters long. This allows the camera and the main unit to be installed
apart, such as in a separate area or room, etc.
1. The main unit should be mounted at this point, if not, install the main unit, see Installing
the Main Unit on page 12 for details.
2. Route the cable towards the main unit accordingly. Probably along the surface or may
pass through a hole on the surface and towards the main unit. For models with separate
extension cable, connect the extension cable to the camera module connector.
3. For excess cable, properly roll the cable as shown below; do not bend the cable.
4. Connect the camera cable connector to the Camera port of the main unit.