Manual

www.acti.com
Hardware Manual
24
Connecting an Audio Out Devices (Optional)
Depending on your surveillance needs, you may connect an audio output device, such as a
speaker, to the main unit. In this case, you need to connect the audio output device to the audio
terminal block connector.
To connect an audio output device, map the pins to one of the pin combinations below:
Device
Pin
Mapping Instructions
Audio Output
GND
Connect the wires of the audio output device to GND
and AUDIO.OUT.
AUDIO.OUT
Press and hold the orange tab as you insert the wire through the pin slot, then release the orange
tab to secure the wire.
NOTE: The audio input pins are already connected to the built-in microphone. Do not modify this
connection.