Manualshelf

Hardware Manual

ManualsBrandsACTi ManualsAccessoriesBundled Surface Mount for Pinhole Covert Camera
12345678910
www.acti.com
Hardware Manual
10
8
DC 12V Power Input
In case the camera is connected to a non-PoE (Power over
Ethernet) switch, use this connector to connect the camera to an
external power adapter. See Connecting a Power Adapter
(Optional) on page 24 for information.
9
Reset Button
Restores the factory default settings of the camera. To reset the
camera, while the power is on, press and hold the Reset Button for
at least 5 seconds or until the Power LED goes off.