Manualshelf

Hardware Manual

ManualsBrandsACTi ManualsAccessoriesBundled Surface Mount for Pinhole Covert Camera
11121314151617181920
www.acti.com
Hardware Manual
14
Step 2: Route and Connect the Camera Cable
The camera cable is 12 meters long. This allows the camera and the main unit to be installed
apart, such as in a separate area or room, etc.
1. The main unit should be mounted at this point, if not, install the main unit, see Installing
the Main Unit on page 12 for details.
2. Route the camera cable towards the main unit accordingly. Probably along the surface or
may pass through a hole on the surface and towards the main unit.
3. Connect the camera cable connector to the Camera port of the main unit.
Step 3: Connect to the Network
1. Connect one end of a network cable to the Ethernet port of the main unit.