Manualshelf

Hardware Manual

ManualsBrandsACTi ManualsAccessoriesBundled Flush Mount for L-Shape Pinhole Covert Camera
21222324252627282930
www.acti.com
Hardware Manual
22
Step 2: Mount the Camera
1. Mount the camera to the tilted mount using the two (2) bundled screws.
2. Attach the surface mount to the camera.
Step 3: Route and Connect the Camera Cable
The camera cable is 12 meters long. This allows the camera and the main unit to be installed
apart, such as in a separate area or room, etc.
1. The main unit should be mounted at this point, if not, install the main unit, see Installing
the Main Unit on page 12 for details.
2. Route the camera cable towards the main unit accordingly. Probably along the surface or
may pass through a hole on the surface and towards the main unit.
3. Connect the camera cable connector to the Camera port of the main unit.