AVXMTGHR1D 7“ LCD Monitor with DVD Player Build In for Rear Entertaiment Owner’s Manual / Installation Guide
CONTENTS IMPORTANT NOTICE----------------------------------2 MATERIAL TO USE IN THIS PACKAGE------------------3 HEADREST COVER REPLACEMENT -------------------4 VEHICLE PREPARATION ----------------------------5 Wireless FM Modulator ------------------------------6 AVXMTGHR1D WIRING DIAGRAM ---------------------7 FEATURES ------------------------------------------8 SPECIFICATIONS ------------------------------------8 CONTROLS AND INDICATORS DIAGRAM -------------9 REMOTE CONTROL OPERATION --------------------
CAUTION RISK OF ELECTRONIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT NOTICE Installation of headrest products require careful planning and preparation. Be extremely careful of seats that have airbags built into them. Keep wiring away from any air bag wiring (usually identified by yellow connectors and yellow wire jackets).
MATERIAL TO USE IN THIS PACKAGE: 1) AVXMTGHR1D System Monitor (AVXMTGHR1D ) Monitor with DVD Player Note: The AVXMTGHR1D monitor has been designed to be interchangeable from one headrest to the other. The headrests will still have the Green and Blue DIN cables on them and should be connected to their respective connectors. Note: Monitor include headrest cable.
HEADREST COVER REPLACEMENT: 1.Unscrew the two screws,and removed the screen. Unscrew 2.Remove the Hearest cover. Remove 3.replace the leather with the matching color cover. 4.connected the cable,lock the monitor's buttons into position and push it in place to lock. Push 5.
VEHICLE PREPARATION 1) Read the manuals and get familiar with the electrical requirements and connections. 2) Prepare the vehicle by removing any interior trim necessary to gain access to the vehicle's wiring as well as all areas where interconnecting wire harnesses will be located. (Refer to the Installation Procedure).
) Connect all the components together (electrically) and verify proper operation of all the system functions. 8) After verifying the proper operation of the system mount each component. 9) When all the components are mounted, recheck the entire system to be sure it is functioning correctly. Make sure that no wiring was pinched, or connected improperly during the final installation..
AVXMTGHR1D WIRING DIAGRAM Headrest Monitor Headrest Monitor GREEN RED (P/N.: 45-2S-08230G) (P/N 45-2Z-08200G) Note: The headrests will still have the Red and Green DIN cables on them and should be connected to their respective connectors.
FEATURES • 7” Digital TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor • Built-in DVD Player • OSD (On Screen Display) for control of picture quality and functions • Three Audio / Video Source inputs (DVD/USB/SD CARD, AV and AUX). • Last position memory for DVD • Screen mode selection (4:3, 16:9) • Full function remote control • Playing DVD, CD and MP3 disc • USB 2.
CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) PUSH - POWER/SOURCE + VOLUME /NEXT PUSH PLAY/PAUSE MENU STOP VOLUME /PREVIOUS COVER open IR SENSOR AUX IN USB PORT SD Card Reader 9 IR HEADPHONE TRANSMITTER LENS HEADPHONE JACK
REMOTE CONTROL OPERATION POWER SOURCE DVD SOURCE 1 2 26 MUTE VOLUME - 3 4 + PIX 24 ENTER PREV NEXT PAUSE FF STOP FR PLAY 6 21 20 SETUP REPEAT SUBTITLE AUDIO ZOOM SYSTEM MENU DISC MENU DISPLAY 8 9 23 22 5 7 25 19 18 17 10 16 11 15 1 2 3 4 5 6 7 8 FMM ON/OFF CHANNEL SELECT 9 0 12 14 13 14. FMM CHANNEL SELECT 15. DISC MENU 16. DISPLAY 17. SUBTITLE 18. AUDIO 19. FF 20. STOP 21. NEXT 22. PAUSE 23. ENTER 24. PIX ( Picture Select ) 25.
MENU ADJUSTMENT The System Menu Contains features and options that let you customize your system to change the screen mode display and OSD language. 1) 2) 3) Press the “ ” button on unit or the SYSTEM MENU button on the remote control, the main page of the system menu will appear on screen. Use the“+”“-”buttons to change the setting . To Select to next menu press the “ ” button or the SYSTEM MENU.
SETTINGS AND ADJUSTMENTS The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the on-screen display or prevent DVD playback for children. Using the Setup Menu 1. Press the SETUP button on the remote. The Setup Menu appears on the screen as shown per diagram. There are 5 option on the top part of theSetup Menu. Each option represents a page. 2. To set the desired option, move the highlight Into the setup area using the cursor button u.
Selecting Folders and Songs When an MP3 is loaded in the player, the navigation menu appears automatically. 1. Press p or q to move the highlight to the desired folder and press ENTER to display the songs in the folder. 2. Press p or q to move the highlight to the desired folder and press ENTER to begin playback of the highlighted song. Selecting a Play Mode You can choose what order the songs will play on a disc temporarily. The default play mode is FOLDER.
TROUBLESHOOTING SOLUTION PROBLEM IR remote inoperative ? Verify that the batteries in the remote are fresh. ? Verify that the remote sensor eye is not obstructed. Disc won't play ? Insert a disc with the label side facing upwards. ? Check the type of disc you put into disc tray. This DVD only plays DVD, audio CD and Mp3. ? Both the unit and the disc are coded by region. If the regional codes don’t match, the disc can’t be played. Play starts, but then stops immediately ? The disc is dirty. Clean it.
© 2010 Audiovox Electronic Corp.
