User's Manual

23. PIX (Picture Select)
Each time of this button is pressed, on screen picture adjustment displays the
“Adjustment bar” for BRIGHTNESS, CONTRAST, COLOR, TINT(For NTSC only) or
RESET.
Once the desired adjustment bar is displayed, use the VOLUME+/ –VOLUME– button
to adjust the setting.
The display will automatically turn off if no adjustments are made within 6 seconds.
Remark: DVD Source will only allow user to adjust BRIGHTNESS, CONTRAST &
COLOR.
24. VOLUME UP (+) or DOWN (-)
Press to increase or decrease the level of the picture adjustment. The volume use to
adjust the picture setting level after the picture select button is pressed.
Note: volume not in use in this model, (+) and (-) only use in adjust pix select setting.
25. EJECT ()
This button is used to eject the disc.
26. SOURCE*
Video signals from video equipment connected to the audio / video input can be
displayed on the monitor by pressing this button. Each time the button is pressed,
the audio/video source will switch between DVD, AV and AUX.
8