User's Manual

16
DEFAULT DVD
This allows the user to set the system default source to DVD.
Notes:
• If source default is set to ON, every time the unit is turned off then on, the unit will power
up and automatically switch the source to DVD. If source default is set to OFF and the
unit is turned off then on, the unit will power up in whatever source was last selected.
• The unit is set to source default DVD on as the default mode of operation.
• Selection of Source default can only be made from within the system menu.
PICTURE WFMM SETTING
DEFAULT DVD
SCREEN MODE
MONITOR MODE
IR TRANSMITTER
LANGUAGE
FACTORY SETTING
ON OFF
16:9 4:3
M1 M2
ON OFF
EXIT
PICTURE WFMM SETTING
DEFAULT DVD
SCREEN MODE
MONITOR MODE
IR TRANSMITTER
LANGUAGE
FACTORY SETTING
ON OFF
16:9 4:3
M1 M2
ON OFF
EXIT
SCREEN MODE
This allows the user to change the screen format (aspect ratio 4:3, 16:9).
To select the screen aspect ratio format:
1. Highlight SETTING MODE and press the CURSOR q button to
SCREEN MODE Submenu.
2. Press the Cursor button t or u to select 4:3 or 16:9.
PICTURE WFMM SETTING
DEFAULT DVD
SCREEN MODE
MONITOR MODE
IR TRANSMITTER
LANGUAGE
FACTORY SETTING
ON OFF
16:9 4:3
M1 M2
ON OFF
EXIT
MONITOR MODE
This allows the user to set the system monitor code M1/M2
1. Highlight SETTING MODE and press the CURSOR q button to
MONITOR MODE Submenu.
2. Press the Cursor button t or u to select M1 or M2.