User's Manual

6
CONTROLS AND INDICATORS DIAGRAM (SIDE VIEW)
1. DVD Disc Insertion Slot
For loading and removing discs. When disc is inserted, the unit
will automatically turned ON and switched to DVD source.
Insert disc with label side facing up.
Note: Disc in the slot indicator will be red color, without disc in
in the slot, the indicator will be change to green color.
2. AUX IN
The Jack is used for audio and video input.
3. USB INPUT FOR USB MEMORY DEVICE
Allows for the connection of an USB or memory device.
4. HDMI 1 INPUT
Allows for the connection of HD Audio and Video (DVD or
Blu-ray player), and mobile phone with supported MHL device.
5. THREE POSITION DOME LIGHT SWITCH
ON - Turns on the dome lights.
OFF - The dome lights will not turn on in this position.
AUTO - Automatically switches on the dome lights in
conjunction with the vehicle's interior illumination.
The ADVEXL10 has an option that allows the user to select from two IR
transmit and receive codes (M1 or M2). This feature can be used when
using two ADVEXL10s in the same installation or if the vehicle has a RSA
(Rear Seat Audio) that uses an “A” channel headset. The ADVEXL10
comes factory set to M1. When in the M1 mode, the unit will respond to
remote commands when M1 is selected on the remote control and will
transmit audio on the A channel. When in the M2 mode, the unit will
respond to remote commands when M2 is selected on the remote control
and will transmit audio on the B channel.
Note: Use 2-channel IR headphones set to CH B when the monitor is
set to M2 mode.
Note: M1 will appear on the screen for 4~5 seconds.
Selecting a Monitor Code (M1 or M2)
1. Power ON the unit and wait until M1 on the OSD appears. M1 will
appear on the screen for 4~5 seconds.
2. To change the monitor code from M1 to M2, press the System Menu
setting.
3. To change the monitor code from M2 to M1, repeat the System Menu
select the monitor mode to M1.
1
2 3 4 5
FMM 88.3MHz DVD
IRT ON
M1
FMM OFF DVD
IRT ON
M2
PICTURE WFMM SETTING
DEFAULT DVD
SCREEN MODE
MONITOR MODE
IR TRANSMITTER
LANGUAGE
FACTORY SETTING
ON OFF
16:9 4:3
M1 M2
ON OFF
EXIT