User's Manual

16
Playing DVDs
1. Press the DISPLAY button on the remote control to display the status banner. The
banner include title, chapter, angle, audio, subtitle, title selection & chapter
selection.
2. Title Selection
Press numeric(0~9) buttons to initiate a change of title selection. Then press ENTER
button to implement the selection.
3. Chapter selection
Press numeric(0~9) buttons to initiate a change of chapter selection. Then press
ENTER button to implement the selection.
As toggle through the options, the repeat option changes at that time. The tracks, for
example, repeats once that track has ended. The selected repeat option loops
repeatedly until turn it off.
Playing USB, Memory Cards (SD/MMC/MS)
1. The system will detect the insertion of the USB or CARD (SD/MMC/MS) media
automatically if no disc is loaded. The system only auto detects the first media inserted
(card or USB drive); the second media source can be manually selected by pressing
the DVD source button on the remote control.
2. When a disc is inserted, the system will switch to DVD mode immediately regardless
of which type of media (card or USB) is currently playing.
3. The DVD source (DVD, USB, or SD Card) can only be changed if the DVD is stopped
(not playing)
4. This system cannot support more than 2 memory partitions on the USB thumb drive.
Note: The system will always default to the DVD when the system detect a disc in the
DVD player.
Screen Saver
Off
Load Factory
On
Language
Video
Rating
Misc
Screen Saver
ON - Screen saver will appear
OFF - Screen saver will not appear
Note: The DVD player will enable the Screen Saver
Mode if the unit is inactive for approximately 2 minutes.