User's Guide

13
MAIN PAGE
TV Display
The TV DISPLAY setup allows you to set the screen aspect ratio.
Normal/PS
This displays the wide picture on the screen with a
portion of the left & right side removed.
Normal/LB
This displays the wide picture with black bands on
the upper and lower portions of the screen.
WIDE
This displays a wide picture with black bands on the upper and lower portion of the
screen. The bandwidth will vary, depending on the aspect ratio of the disc.
Note: This setting can only be made when there is no disc in the player.
Angle Mark
The Angle Mark setup allows you to turn on/off the
angle mark display on the screen.
ON -The screen shows angle mark if an angle
option is available on a DVD.
OFF -There is no angle mark display on the screen
even though there is an angle option available
On a DVD.
OSD Language
The OSD Language setup allows you to select the
language for the on-screen display. The user can
either select English, French, Spanish, Italian or
German for the OSD Language.
Screen saver
This option allows the operator to set the Screen Saver mode.
ON -Screen saver will appear
OFF -Screen saver will not appear
Note: The DVD player will enter Screen Saver
mode if the unit is inactive for approximately 2
Minutes.
TV Display
Angle Mark
OSD Language
Screen Saver
Last Memory
WIDE
OFF
ENG
ON
ON
General Setup Page
Set TV Display Mode
Normal/PS
Normal/LB
WIDE
TV Display
Angle Mark
OSD Language
Screen Saver
Last Memory
WIDE
OFF
ENG
ON
ON
General Setup Page
Set Angle Mark
ON
OFF
TV Display
Angle Mark
OSD Language
Screen Saver
Last Memory
WIDE
OFF
ENG
ON
ON
General Setup Page
Set OSD Language
English
French
Spanish
Italian
German
TV Display
Angle Mark
OSD Language
Screen Saver
Last Memory
WIDE
OFF
ENG
ON
ON
General Setup Page
Screen Saver
ON
OFF