User's Guide

14
Last Memory
ON - DVD will have last memory when power
interruption
OFF - DVD will not have last memory when
power interruption
VIDEO QUALITY SETUP
TV Type
The TV Type setup allows you to select the color
system of the TV to be connected.
NTSC - Select this type for NTSC TV
PAL - Select this type for PAL TV
Multi - Select this type for multi-system TV
PASSWORD SETUP PAGE
Password Change
This item allows you to change the password.
After you have selected the password change, the
Figure below is shown:
Old Password
Input the old password or the default password
( 4 digits )
New Password
Input a new password ( 4 digits ) using the
numbers buttons ( 0 ~ 9 )
Confirm PWD
Confirm the new password by entering the same password again. Then press
ENTER to apply the changes.
NOTE: The Default Password is 3308. This password is always effective even after
you have selected your own password and change it. To avoid the possibility of
others using the default password to set the parental level and change the
password, you can record this default password in another area and delete it from
this manual. Some discs can be limited depending on the age of users while some
discs cannot.
TV Display
Angle Mark
OSD Language
Screen Saver
Last Memory
WIDE
OFF
ENG
ON
ON
General Setup Page
Set Last Memory State
ON
OFF
TV Type
Sharpness
NTSC
Med
Video Quality Setup
Set TV Standard
NTSC
PAL
Multi
Password
Change Password
Change
Password Setup Page
Please Enter Old Password
Old Password
New Password
Confirm PWD
OK