User's Guide

ACCESSORIES
WIRELESS HEADPHONES
WIRED HEADPHONES (OPTIONAL)
SOURCE FEATURE
The ODM98501 includes a built-in infrared transmitter for use with the supplied
wireless headphones. The headphone volume is adjusted using the controls on
each headset. Any number of wireless headphones may be used but they must be
used within a line of sight from the transmitter, as infrared transmissions, like visible
light travel only in a straight line. See the documentation accompanying your
wireless headphones.
There is one 1/8” headphone jack on the unit that can be used with any standard
wired stereo headphones with a 1/8” plug. This jack is
controlled by the volume up/down buttons on the remote control.
AV1
The AV1 input may be connected to a external video source, video game
system, or other audio / video devices. To access the audio / video inputs, turn
the unit on and press the S (source) button or the Source button on the remote
control until "AV1" is displayed on the screen. Turn the video source component
on with its power button or remote control and it is now ready to play the audio
and video signals from the source connected .
Note: AV1 sources are available only if pre-installed during your video product
installation.
AUX
The AUX input may be connected to a external video source, video game system, or
other audio / video devices. To access the audio / video inputs, turn the unit on and
press the S (source) button or the Source button on the remote control until "AUX" is
displayed on the screen.
Note: Similarly, if an iPod is to be used, such as the Apple ipod 30, connect one end of
the iPod adapter cable (purchased separately) to the AUX and USB connector on the
unit and connect the other end of the cable to the iPod connecter. The iPod adapter
cable can be purchased from the vendor where the unit was sold.
20