User's Guide

24
WIRING DIAGRAM
1) Make the connections to the vehicle for the 12 pin wiring harness.
2) Connect 2 pin power harness to vehicles electrical system by tapping into an
accessory hot line and a good ground.
3) Connect the 12 pin harness to the mating connector on the video monitor.
4) Verify all functions of the system before final mounting of the finished assembly.
A/V Source Definitions:
1. DVD - Built in DVD
2. AV1
- Supplied 12 Pin Power / Signal Harness to 3 RCA Jack Pigtail is used for
AV1 input.
3. AUX - AUX input.
*NOTE: Extending the wireless antenna beyond its 12 inch length will cause the
FM modulator to exceed FCC limits of wireless transmission. When
installing the unit position the antenna for best reception.
2 Pin Power
Wire Harness
with choke
AV1 Video
Source
Dome Light
Power Source
FM ANT
Line In-V (Yellow) Line In-R (Red) Line In-L (White) Line In-V (Yellow) Line In-R (Red) Line In-L (White)
12 Pin Power /
Signal harness