AVX10USB 10.
Congratulations Congratulations on your purchase of this Mobile Video Rear Seat Entertainment System! The SBD61011 has been designed to provide passengers with unlimited content options delivering smiles for many miles. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment.
Table of Contents Features..............................................................................................................5 Materials to use in this package................................................................. 6 Docking bracket installation....................................................................... 8 Wiring diagram................................................................................................ 7 Control and indicators diagram.............................
Features • 10.1” Digital Thin Film Transistor (TFT) Active Matrix Liquid Crystal Display LED Backlit Monitor • Built-in DVD Player • Last position memory for DVD Player • Six Audio / Video Source Inputs DVD, USB, CARD, AV, AUX and HDMI. • USB 2.
Materials To Use In This Package 1 2 3 4 5 6 7 8 1. AVX10USB system unit -(1PC) 2. MTB60001 docking bracket -(1PC) 3. Rubber pole adaptor x 7 pairs Ø9.5mm,Ø11.5mm, Ø12.0mm, Ø12.2mm, Ø13.3mm, Ø13.95mm and Ø15.95mm Note: This rubber pole adaptor is use to fit the MTB60001 docking bracket on the pillow pole. 4. Remote Control W/ Battery -(1PC) 5. 8P Din Power + AV out RCA cable harness -(1PC) 6. 8P Din M1 + M2 Connector harness -(1PC) 7.
Docking Bracket Installation 1. Choose a correct rubber pole adaptor and put it on the pillow metal pole before install the docking bracket. 2. Install the docking bracket to the pillow metal pole and tighten with the screw know. 3. Plug in the harness cable on the monitor before dock on the docking bracket. Harness wire need to install properly..
Wiring Diagram Master Monitor Headrest Cable Blue Satellite Monitor Headrest Cable Green Headrest Cable Blue Headrest Cable Green Video In Yellow Audio In Left White Audio In Right Red 8P Din + AV Connector Harness Green Or DC 12V In +12V(ACC) Ground Green Blue Green DC 12V In +12V(ACC) 8P Din M1+M2 Connector Harness Ground NOTE:Please DO NOT use incorrect wrong cable harness on the monitor system because user will loos some function if install incorrectly.
Controls And Indicators Diagram 14 15 16 17 18 19 20 13 12 11 10 9 8 7 6 5 4 3 2 1 21 22 1. Power Indicator Red light indicator ( Bright = Standby Mode, Dim = Power On 2. Power/ Source ( ) To turn system On/ Off and to select the source. 3. Infrared Transmitter To broadcast audio signal to IR headphone. 4. Left/ Next( ) Short press for Left cursor and level increase on System Menu pages. Long press for next chapter, track during play the DVD. 5.
Controls And Indicators Diagram(Continued) 11. Stop( ) Press once for pre-stop, press twice for totally stop the DVD/ Media information. 12. Infrared Transmitter To broadcast audio signal to IR headphone. 13. Play/ Pause( ) To start playback or pause the DVD/Media. 14. Open Knob To open the DVD player cover to install or remove the disc. 15. HDMI Input For connection of device with HDMI/ MHL output. 16. TF Card Input For connection of TF Card memory device to playback media contents. 17.
Remote control operation Battery Replacement 1. Remove the battery cover. 2. Insert two AAA batteries into the battery holder. Be sure to observe the correct polarity. 3. Reinstall the battery cover into the battery holder until the holder is click .
Remote Control functions 12
Remote Control functions(Continued) * Function control is available on the unit and the Remote Control. ** Function not available in this model. 1. POWER* Press this button to turn the unit ON and OFF. 2. SOURCE* Press to display the Source OSD for DVD, USB, CARD, AV,AUX and HDMI1. 3. DVD Source** No function on this model. 4. DVD Mode Select Button Switches certain function keys on the remote control for DVD function. 5.
Remote Control functions(Continued) 13. SCAN BACKWARD ( ) Press to search in a backward direction. Press repeatedly to change the search speed from 2, 4, 8, 20 times and normal speed. 14. SCAN FORWARD ( ) Press to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8, 20 times and normal speed. 15. PREVIOUS ( ) Press to return to the previous chapter or track. 16. NEXT ( ) Press to skip to the next chapter or track. 17.
Remote Control functions(Continued) 23. FMM ON/OFF Turns the FM Modulator power on/off. 24. AUDIO Press to display and select audio language in DVD mode. Each time this button is pressed, the language changes. 25. P IX ( Picture Select ) This button is used to make picture adjustments. Use the UP or DOWN direction buttons to select BRIGHTNESS, CONTRAST,COLOR, TINT, or RESET. Use the UP or DOW buttons to adjust the setting.
Souce menu The System is capable of accessing six source inputs. To select or change a source, press the source button on the front panel or the Source button on the remote control. The source OSD will appear on the screen as shown in the figure below. Use the ＋ or － cursor buttons on the front panel or the p or q cursor buttons on the remote control to highlight a source. Press the Source button on the front panel or the OK button on the remote control to select the desired source.
Source menu(Continued) AUX An external video source such as a video game system or other audio/video devices may be connected to the system via the AUX input. Connect your peripheral device to the supplied Aux Adapter harness and plug the harness into the AUX Input on the side of the system. Turn the external source component on with its power button or remote control and it is now ready to play the audio and video signal from the source connected to AUX.
System Menu Setting and Adjustments PICTURE CONTROL The PICTURE setup functions allows the user to select and set the picture control function. PICTURE BRIGHTNESS, CONTRAST, COLOR adjustments range from 0 to 32. TINT adjustments range from -16 to 16.
LANGUAGE PICTURE TV ENGLISH DEFAULT DVD ON MONITOR MODE M1 SC PICTURE AS AUDIO PAS SYSTEM SYSTEM RA PLAYER PLAYER LAS FMM FMM AU AUDIO RESET System Menu Setting and Adjustments(Continued) MONITOR MODE This allows the user to change the system to M1 or M2 mode. Once the setting is changed, the remote control and IR headphones will only work if set to that same setting. 1.M1 Mode - For the Remote Control to operate the system when set to M1, press the M1 button on the Remote Control.
System Menu Setting and Adjustments(Continued) PLAYER MODE The Player setup function allow the user to select DVD functionality. TV SYSTEM The TV SYSTEM setup allows the user to choose television standard which corresponds to your TV. TV SYSTEM NTSC-Select this type for NTSC TV PAL-Select this type for PAL TV AUTO-Select this type if the connected screen is a multi-system TV. The video format of the disc (NTSC or PAL) will determine the video signal output.
FMM AUDIO LANGUAGE MOVE ENGLISH ADJUST MENU FMM AUDIO LANGUAGE EXIT ENGLISH MOVE ADJUST TV SYSTEM PICTURE TV SYSTEM AUDIO NTSC S M AUDIO 4:3 PS ENGLISH SYSTEM ON SYSTEM RATING MENU LANGUAGE ASPECT RATIO 16:9 PICTURE PLAYER LAST MEMORY AUDIO FMM PASSWORD SETUP RATING LAST MEMORY PASSWORD SETUPPLAYER AUDIO LANGUAGE FMM The default password is 3308. To change the rating of the DVD player press 3308 to access the RATING setting.
System Menu Setting and Adjustments(Continued) AUDIO LANGUAGE This setting allows you to select a preferred audio language. This function only applies to discs encoded with different audio languages. Options: ENGLISH, FRENCH, SPANISH and GERMAN.
System Menu Setting and Adjustments(Continued) FMM MODULATION(ON/OFF) This setting allows you to turn the FMM modulator ON or OFF. FMM CHANNEL This setting allows you to select the frequency. The unit has a 100 channel built-in wireless FM Modulator. The FM Modulator can be set from 88.1MHz to 107.9MHz in 0.2MHz steps, i.e.88.1,88.3,88.5,88.9,90.1 etc. FM MODULATION SYSTEM Use the p q t or u cursor buttons to select a PLAYER frequency not used by a radio station in the area.
Playing DVD and Audio Discs Playing DVDs When a disc is loaded. Press the DISPLAY button on the remote control to display the status banner. The status banner includes the disc title, chapter audio language , subtitle & angle. Title Selection: Some DVDs contain more than one title (e.g. sitcoms, collections, etc.) Press the numeric (0-9) buttons to initiate a change of chapter title selection. Using the repeat feature to select OFF, Chapter, Title and Repeat All to play the movies contents.
Playing DVD and Audio Discs(Continued) Use the cursor keys p q t or uand OK to navigate the on screen menus. The USB port can play AUDIO, PHOTO, VIDEO . The following formats are supported: Audio • MP3 • WMA • AAC Photo • JPEG • BMP Video*(720 x 576 max resolution) • AVI (MPEG4-DIVX (DIVX 4.0/5.0), MPEG4-XVID • MPG (MPEG-1) • MOV (MPEG4-DIVX) • FLV (FLV1) • SWF (FLV1) • DAT (MPEG1) • VOB (MPEG2) Note: All formats may not play depending on the software used to convert the video file from its original format.
DVD Basics To get the optimum use out of the DVD Player, please read the following: DVD Region Code The DVD player is preset to a region code at the factory depending on where the DVD player is sold. A DVD from a different region cannot be played in this unit and the unit will display "WRONG REGION”. Region 1- USA, Canada Region 2- Japan, Europe, South Africa, Middle East, Greenland Region 3- S.
Troubleshooting PROBLEM IR remote inoperative SOLUTION • Verify that the battery in the remote is fresh. • Verify that the remote sensor eye is not obstructed. Disc won't play • Insert a disc with the label side facing the viewer. • Check the type of disc you put into disc tray. This DVD only plays DVD, audio CD and MP3s. • Both the unit and the disc are coded by region. If the regional codes don’t match, the disc can’t be played.
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
