VOH8512 DROP-DOWN VIDEO MONITOR ® ELECTRONICS CORP.
Important Notice An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied.
Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Controls and Indicators Diagram 1 2 3 4 4 12 5 11 6 10 7 8 9 14 -4 - 13
Control Function Descriptions 1. Infrared Transmitter and Sensor – Use to transmit audio to the wireless headphones. Also allows the remote control to operate the VOH8512 and to control other accessories in the system. 2. POWER Button – Used to turn the system ON/OFF. Bright red when system is on, dim when off. 3. Three position Dome Light Switch • Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior illumination.
Remote Control Operation IRTA 1 2 3 4 5 6 7 8 9 10 11 BATTERY COVER Battery Installation Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the Remote Control face down. Using a fingernail, lift the battery cover off. 2) Install two “AAA” batteries as shown. Make sure that proper polarity (+ or -) is observed. 3) Align the cover tabs with the remote control and press down until the cover clicks.
Remote Control Function Descriptions *Function control is available on the unit and the remote control. ** Not used in this model *** Function only available if optional TV Tuner is installed. 1. POWER Button* Press this button to turn the VOH8512 on. Press the button again to turn the VOH8512 off. 2. SOURCE Button* Each time the button is pressed, the audio / video source will change: AV1, AV2, AUX. 3.
7. MUTE Button Press this button to mute the audio. Pressing the button again restores the sound to the previously set level. 8. ENTER Button** Used to implement a selected setting or menu option. 9. LEFT ( ) Button** Allows the user to shift left in the menu options. 10. MENU Button** Allows the user to access the main menu. 11. RETURN Button** Allows the user to return to the menu while PBC on. Note : This function only present on VCD 2.0. 12.
14. DISPLAY Button** Press to display DVD Disc current information. Press DISPLAY button Once Twice 3 times 4 times 5 times 6 times 7 times 8 times DVD Player Perform Display current TITLE , CHAPTER & elapsed time Display current SUBTITLE Display current AUDIO language & channel Display current surround mode Display current ANGLE Display A-B current status Display REPEAT current status Display off 15. FM TRANSMITTER ON/OFF Button Turns the FM Modulator ON/OFF. 16.
17. ZOOM Button – Press this button to zoom the picture. ** Press ZOOM button Once Twice 3 times 4 times 5 times 6 times 7 times OSD DVD Player Perform 2X 3X 4X 1/2 1/3 1/4 OFF ZOOM picture 2 times ZOOM picture 3 times ZOOM picture 4 times Reduces picture to 1/2 normal size Reduces picture to 1/3 normal size Reduces picture to 1/4 normal size Returns to normal size 18. PAUSE ( ) Button** Allows the user to pause the playback. ) Button** 19. STOP ( Disc playback will be stopped. 20.
23. FWD ( ) Button** Allows the user to search in a forward direction at 2,4,8, 16 and 32 times the normal speed. 24. PLAY ( )Button** Press this button to activate the play mode when a disc is loaded into the disc compartment. 25. ANGLE Button** Press this button to display and select the available camera angles. Each time the button is pressed, the angle will change. NOTE: The number of angles vary from disc to disc. 26.
31. A-B Button** Allows the user to repeat playback of a DVD or CD from point A to point B. 32. REPEAT Button** Allows the user to repeat a chapter, title, track, or all of a DVD, CD or MP3. 33. Channel Down ( ) Button*** Use this button to decrease the channel number to the desired channel and to scroll downward in the menu options. 34. SETUP Button** Allows the user to access the DVD setup menu and select various playback options (Display, OSD Language, Defaults, Parental Control, Password, Exit Setup).
38. (+) Button* Used to make picture adjustments in picture select mode. 39. NUMBER Buttons*** Allows the user to directly access specific TV channels. 40. IRT A ON/OFF Buttons* Turn Infrared Transmitter power ON/OFF for IR Wireless Headphone Channel A. 41. IRT B ON/OFF Buttons** Turn Infrared Transmitter power ON/OFF for IR Wireless Headphone Channel B. 42. EJECT ( )Button** Used to eject the disc.
Turning the VOH8512 ON or OFF 1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use. 2. Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use the internal backlighting will illuminate the controls. 3.
Remote Sensor The VOH8512 incorporates two Infrared sensors which relay signals from the remote control to allow the unit to be controlled simply by pointing its remote control at the remote sensor eye. The repeater function allows control of auxiliary equipment such as an Audiovox DVD Player or Video Cassette Player. The infrared sensor can relay signals from most manufacturer’s remote controls to its respective component connected to the AV input.
Wireless FM Modulator The VOH8512 is equipped with buit-in wireless FM Modulator*, that allows you to listen to the VOH8512 audio signal by tuning your vehicle’s radio to the selected frequency, (88.3, 88.7, 89.1, 89.5, 89.9MHz). This feature is accessed by using either the FM transmitter buttons on the remote (ON/OFF, Channel Select) or the FM Select button on the unit. Whenever the FM modulator is on, broadcast reception on the vehicles radio will be poor.
Troubleshooting PROBLEM SOLUTION Poor in vehicle radio reception • Check the condition of the vehicle’s radio antenna. • Verify that the antenna is fully raised. • If a relay box (SIRSWB) has been insatalled, make sure that the FM Modulator is turned OFF. • If a wired FM modulator has been installed, verify that it is turned OFF by using the remote or switch. IR sensor inoperative • Verify that the batteries in the remote are fresh. • Verify that the remote sensor eye is not obstructed.
Replacement Parts Remote Control 136-3855 Specifications LCD Backlighting Edge Light Tube Resolution 1440 x 234 Pixels 336,960 Operation Temperature 32 -140º F (0 - 60º C) Storage Temperature -4 - 176º F (-20 - 80º C) Backlight life 10,000 Hours Video Display System NTSC / PAL Video Output 1.0Vp-p @ 75 ohms Power Source 12V DC Dimensions 1”H x 9.5”W x 8.75” 25.4mmH x 241.3mmW x 222.
12 MONTH LIMITED WARRANTY Applies to Audiovox Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
For Customer Service Visit Our Website At WWW.audiovox.com Product Information, Photos, FAQ’s Owner’s Manuals © 2004 Audiovox Electronics Corp.