Product Info

The AW-01 module uses an onboard antenna or an
external antenna in the 2.4G wi-fi frequency band. If the
onboard antenna is used, the following figure shows two
commonly used antenna placement methods that have less
impact on the antenna performance. It is recommended to
choose as much as possible One of the ways to place the
module; Note: The second way of placement requires that the
two sides of the PCB antenna are at least 5.0mm away from the
two sides of the base plate
4.6 WIFI product structure design considerations
The following points should be paid attention to when placing
the product board of the WIFI module in the product structure：
⚫ Since the metal plate and metal surface have a strong