USB User Manual

Setting Up Static IP

on the Computer

To communicate with the Gateway from a computer on the network (to use

the Web Configuration Utility, for example), the user may have to switch the IP

address settings from DHCP-enabled to static IP, so that the computer and the

Gateway are on the same network subnet.

To set up static IP on a computer, select the operating system and follow the

instructions.

☞

Note: The following procedures are based on the Gateway’s

factory default IP address. If the Gateway’s IP address has been

changed, enter the new IP address when instructed to enter an IP

address.

Windows 98 SE

1. From the desktop, click on the Start button in the lower left corner.

2. From the menu that appears, select Settings.