User Manual

13
To create or change the user name and password, controlling access to the Gateway’s Web Configurator
screens, follow these instructions:
1. From the Setup/Configuration screen, select Admin Username/Password from the menu on the left
side.
36 Actiontec 54 Mbps Wireless DSL Gateway User Manual
2.
The “Change Admin Username/Password” screen appears. Enter a new user name (optional) in the
“New Username” text box, then a password in the “New Password” text box. Re-enter the password in
the “Re-enter New Password” text box. Make sure to write the user name and password down and keep
them in a secure location. They will be needed to access to the Gateway’s Web Configurations screens
in the future.
3. Click Save and Restart at the bottom of the screen.
4. The “Save and Restart” page appears. Click the Save and Restart button to save the settings changed in
the Change Admin Username/Password screen.
Once the Gateway has rebooted, the password is active. To access the Gateway’s Web Configuration
screens, the username and password must be entered.