User Manual

14
4
Using Advanced Setup
This section contains information concerning setting up the advanced features of the Gateway, such as
wireless settings, remote management, and Web site blocking, using the Gateway’s Web Configurator.
Accessing Advanced Setup
To access the Web Configurator’s Advanced Setup screens:
1. Open a Web browser. In the “Address” text box type: http://192.168.0.1then press Enter on the
keyboard.
2. The “Main Menu” screen appears. Select Setup/Configuration.
3.
In the “Set Up/Configuration” screen, read the instructions, then select
Advanced Setup
from the menu
on the left side.
Actiontec 54 Mbps Wireless DSL Gateway User Manual
3
4. In the next screen, read the recommendations. To perform an advanced setup on the Gateway, click
Begin Advanced Setup.
5. The “Configuring the Advanced Settings” screen appears. To check all the settings, or if unsure of which
settings to modify, select Next. To modify a specific configuration, click on its name in the menu bar
on the left.
?
Note: To save changes made in any of the Advanced Setup screens, click Save and
Restart at the bottom of the gray menu on the left side of the screen.
WAN IP Address
Selecting WAN IP Address in the “Configuring the Advanced Settings” screen generates the “WAN IP
Address” screen. WAN IP Address allows manual set up of the IP address of the Gateway. There are five
ways to do this: Transparent Bridging, Obtain an IP Address through PPPoE, Obtain an IP Address
Through PPPoA, Obtain an IP Address through DHCP, and Specify a Static IP Address.
? Note: If unsure about which connection is present, check with the Internet Service
Provider (ISP) before continuing.
39 Chapter 4 Using Advanced Setup
After selecting a connection type, click Next to continue configuring the connection.