User's Manual

36
Wireless DSL Gateway User Manual
The “7!.)0!DDRESSvSCREENAPPEARS
7!.)0!DDRESSALLOWSMANUALSETUPOFTHEIP address of the Gateway. To do this:
!
Note: Some DSL providers use PPPoE to establish communica-
tion with an end user. Other types of broadband Internet con-
nections (such as fixed point wireless) may use either $(#0or
static IP address. If unsure which connection is present, check
with Verizon before continuing.
1. Select “$(#0vORhPPPoEvDEPENDINGONTHETYPEOFCONNECTIONTHEISP uses.
If PPP !UTO#ONNECTISBEINGUSEDCLICKINTHEAPPROPRIATECHECKBOX
2. If using PPPoE was selected in step 1, enter the user name and password in the
appropriate text boxes.
3. Select the IP type. If “Single Static IP !DDRESSvwas selected, enter the IP
address in the “Single Static IPvTEXTBOX)Fh-ULTIPLE3TATICIP !DDRESSESvWAS
selected, enter the designated gateway IP address and subnet mask address in
THEh'ATEWAY!DDRESSvANDh3UBNET-ASKvTEXTBOXESRESPECTIVELY