User Manual

WPB3000 Powerline Wireless Network Extender User Manual
6
3.2 Interface and Switch Description
The following table describes interfaces and switch on the Powerline Wireless
Network Extender:
Interface Description
Ethernet 1
RJ45 LAN interface, for connecting a hub, switch, or
computer on a LAN.
Ethernet 2
RJ45 LAN interface, for connecting a hub, switch, or
computer on a LAN.
OFF ON Turn on or turn off the device.
3.3 Hardware Installation
3.3.1 System Requirements
Before installing the device, please ensure that the following items are ready:
At least one Ethernet RJ45 cable (10Base-T/100Base-T)
One WPB3000 Powerline Wireless Network Extender
One PLC device for PLC communication
A PC that is installed with the TCP/IP protocol and can access the Internet.
3.3.2 Before You Begin
Before you install the device, please pay attention to the following items:
When the device is connected to a computer, hub, router, or switch, the Ethernet
cable should be shorter than 100 meters.