User Manual

WPB3000 Powerline Wireless Network Extender User Manual

5.3.1.2 WPS Settings

WPS refers to Wi-Fi Protected Setup. You can use the WPS setup function to add

a wireless client to a network, without setting some specific parameters, such as

SSID, security mode, and password. To use this function, a wireless client must

support WPS. If the wireless client does not support WPS, you must manually

configure the wireless settings of wireless client, and ensure that its SSID and

other wireless security settings are the same as that of the Powerline Wireless

Network Extender.

Choose Wirelss Setup > WPS on the left pane or click WPS in the WIRELESS

SETUP page to display the following page.

The following table describes parameters in this page:

Field Description

Wireless SSID Select a wireless SSID from the drop-down list.

WPA Mode Display current WPA mode.

Enabled WPS Enable or disable WPS.