User Manual

WPB3000 Powerline Wireless Network Extender User Manual
25
Field Description
Push Button
Click the PBC button in this page, and then click
the PBC button in the configuration utility page of
wireless network card or press the WPS
pushbutton on the wireless network card within 2
minutes to finish WPS configuration.
Input Station PIN
Enter the PIN code that is generated randomly by
the configuration utility of wireless card.
WPS Session Status Display current WPS connection status.
Caution:
If you want to use WPS, you must select the WPA-PSK, WPA2-PSK or
WPA/WPA2-PSK mode and the SSID must be broadcasted.
WPS modes contain PBC mode and PIN mode.
PBC Mode
Click the PBC button in the WPS page or press the WPS button on the Powerline
Wireless Network Extender to start WPS connection.
Press the WPS button on the network card or click the PBC button in the
configuration utility page of network card within two minutes to start WPS connection.
After WPS connection is established, the following page appears. The client can
now visit the LAN.