User Manual

WPB3000 Powerline Wireless Network Extender User Manual

In this page, you can configure the LAN settings of the Powerline Wireless Network

Extender. You can modify the IP address of the LAN interface according to the

actual network environment. The default IP address is 192.168.10.1. Please note

that this is an optional operation. Usually, you need not to modify the default

settings in this page.

The following table describes parameters in this page:

Field Description

Router IP Address

Set the IP address that a LAN user uses to access the

router. The default IP is 192.168.10.1. You can change it if

necessary.

After setting the parameters, click Apply to save the settings.

5.3.3 Logout

Choose SETUP > Logout to log out of the Web configuration page.

5.4 Advanced Settings