User Manual

WPB3000 Powerline Wireless Network Extender User Manual
31
Field Description
Enable SSID1~4 Enable or disable the wireless function.
SSID1~4
Set the network name. The SSID can contain up to 32
characters and can be letters, numerals, underlines, and
any combinations of them. The SSID is case-sensitive.
Visibility Status
If Visible is selected, the Powerline Wireless
Network Extender broadcasts its SSID on the
wireless network, and the clients can scan the SSID.
If Invisible is selected, the Powerline Wireless
Network Extender does not broadcast its SSID on the
wireless network and the clients cannot scan the
SSID.
User Isolation
On indicates that the computers wirelessly connecting to
the same SSID cannot communicate with each other.
Off indicates that the computers wirelessly connecting to
the same SSID can communicate with each other.
Disable WMM
Advertise
This function is not available. If this function is disabled,
the wireless PLC router adopts WMM to mark priority and
to arrange the order of Wi-Fi network queues.
After setting the parameters, click Apply to save the settings.
Caution:
The settings in this page only apply to professional users who have deeper
understanding in the wireless LAN. If you are not aware of the impact
caused by the modification, please do not modify the settings in this page.
5.4.1.2 Advanced Security
Choose Advanced Wireless > Advanced Security on the left pane or click
Advanced Security in the ADVANCED WIRELESS page to display the following
page.